Metal & Stone Cutting Hire in Sutton

When working with steel, concrete, brick, or block, you need the proper grinder, which is what our angle grinder hire in Sutton provides. The electric modes are available in 110V or 240V, with 115mm, 230mm, or 300mm blades for different work sizes. Diamond blades are used for concrete, block and tile work, while carborundum blades are used for steel. Working somewhere without power? Our petrol cut-off saw, with its 300mm diamond blade, can cut up to 90mm of concrete or brickwork without needing a socket in sight. It is also ideal for ceramic and porcelain roofing and flooring projects.

Precision is important when cutting blocks, bricks, or stone slabs, which is why our wet saw bench hire in Sutton uses wet-cut technology. Whether you are shaping paving slabs or timing blockwork to fit, the 110V wet saw bench, fitted with a 350mm diamond blade, keeps dust to a minimum and ensures the cuts stay clean and accurate.

You require specialist tools for the concrete floor, and our floor cutter hire provides the exact equipment you will require. A diamond-bladed wet floor saw is used to cut through concrete floors up to 100mm deep, which is suitable for chasing out sections or cutting expansion joints. Equipped with tungsten flails, it can remove coatings, key up concrete, and level surfaces for the final job.

Running cables or pipework through a wall gets far easier with our wall chaser hire in Sutton, which cuts a channel up to 30mm deep with minimal mess. For bigger openings, the Husqvarna Cut & Break saw makes dust-controlled cuts through block or brick walls up to 350mm thick, using water to keep airborne dust to a minimum. It’s the tool of choice for cutting door and window openings into concrete or brick walls without filling the site with dust.

For steel and aluminium, tools must be capable of cutting through without sparking; this is what our metal-cutting equipment hire in Sutton is designed around. Steel cutting shears handle sheet metal safely in lofts and tight spaces where sparks aren’t an option. Bench-mounted cut-off saws, fitted with carborundum blades, give you a neat, angled finish on various metals, while our bolt croppers, available in two sizes, make short work of reinforcing mesh and mild steel on construction sites.